Smart Positioner YT-3700 / 3750 series Smart Valve Positioner accurately controls valve stroke in response to an input signal of 4~20mA from the controller. Built-in micro-processor optimizes the positioner’s performance and provides unique functions such as Auto-Calibration, PID Control, and HART Protocol Communications.

• LCD display
• 4 buttons for local control
• 0.5 second positioner boot-time
• Positioner operates normally even there are sudden changes in supply pressure and / or high vibration environment
• reduces operating costs in large-scale plants
• compatible with most of controllers
• Orifices can be installed even in the field

YT-3300/3350 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Auto calibration
• Auto/Manual switch
• HART comunication
• LCD display
• PID control
• 4 buttons for local control
• Feedback signal
• Limit switch

YT-3303 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Auto calibration
• Auto/Manual switch
• HART comunication
• LCD display
• PID control
• 4 buttons for local control
• Feedback signal

YT-3301 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Separated feedback module
• Auto/Manual switch
• HART comunication
• Auto calibration
• PID control
• 4 buttons for local control
• LCD display
• Feedback signal

YT-3400/3450 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Auto calibration
• PID control
• HART comunication
• Auto/Manual switch
• Feedback signal
• 4 buttons for local control
• LCD display
• Limit switch

YT-2500/2550 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Fail freeze function
• Near zero air consumption level
• HART communication
• Auto calibration
• PD control
• 4 buttons for local control
• LCD display
• Feedback signal
• Limit switch

YT-2501 Smart Positioner supplies remote functions and higher liabilities in high temperature and vibration environment.

• Separated feedback module
• Near zero air consumption level
• HART comunication
• Auto calibration
• PD control
• 4 buttons for local control
• LCD display
• Feedback signal
• Fail freeze & safe function

YT-2600 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.

• Fail freeze function
• Near zero air consumption level
• HART comunication
• Auto calibration
• PD control
• 4 buttons for local control
• LCD display
• Feedback signal
• Limit switch

TMP-3000 valve stroke, according to input signal of 4~20mA being delivered from controller.

• Interchangeable fail action
• Near zero consumption level
• LCD display with backlight
• Feedback signal
• 4 buttons for local control
• Simple mounting
• Auto calibration

The Electro-Pneumatic Positioner YT-1000L is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.

• Simple zero and span adjustment
• No resonance between 5-200Hz
• Auto/Manual switch
• RA v.s. DA action and 1/2 split range setting by simple adjustment.
• Internal feedback signal is available as an option (weather proof only)

The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.

• Simple zero and span adjustment>br> • No resonance between 5-200Hz
• Auto/Manual switch
• RA v.s. DA action and 1/2 split range setting by simple adjustment.
• Internal feedback signal is available as an option (weather proof only)

YT-1050, the Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.

• Simple zero and span adjustment
• No resonance between 5-200Hz
• Auto/Manual switch
• RA v.s. DA action and 1/2 split range setting by simple adjustment.

The Pneumatic Pneumatic Positioner YT-1200L is used for pneumatic linear valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.

• Simple zero and span adjustment
• No resonance between 5~200Hz
• Auto/Manual switch
• RA v.s. DA action and 1/2 split range setting by simple adjustment

The Pneumatic Pneumatic Positioner YT-1200R is used for pneumatic rotary valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 15 psi or split ranges.

• Simple zero and span adjustment
• No resonance between 5~200Hz
• Auto/Manual switch
• RA v.s. DA action and 1/2 split range setting by simple adjustment

Air filter regulator suitably reduce plant’s main air supply pressure and supplies to valve positioner(s) or control device(s).

• Maintain stable outlet pressure
• Light weight and compact size
• 5 micron filter
• Relief function – discharge pressure if outer pressure is higher than set pressure

Air filter regulator suitably reduce plant’s main air supply pressure and supplies to valve positioner(s) or control device(s).

• Maintain stable outlet pressure
• Light weight and compact size
• 5 micron filter
• Relief function – discharge pressure if outer pressure is higher than set pressure

Air filter regulator suitably reduce plant’s main air supply pressure and supplies to valve positioner(s) or control device(s).

• Maintain stable outlet pressure
• Light weight and compact size
• 5 micron filter
• Relief function – discharge pressure if outer pressure is higher than set pressure

Air filter regulator suitably reduce plant’s main air supply pressure and supplies to valve positioner(s) or control device(s).

• Maintain stable outlet pressure
• Light weight and compact size
• 5 micron filter
• Relief function – discharge pressure if outer pressure is higher than set pressure

Volume booster relay, YT-300 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Volume booster relay, YT-320 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Volume booster relay, YT-310 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Volume booster relay, YT-305 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Volume booster relay, YT-325 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Volume booster relay, YT-315 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

• Supplies constant air pressure at the rate of 1:1.
• By-passing control enhances safety of control valve.
• Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
• Built-in 100 mesh screen filters dusts in the air.

Lock Up Valve, YT-400 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

• Compact size – NO bracket is required
• Detects small variation of the pressure – below 0.01MPa.

Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

• Compact size – NO bracket is required
• Detects small variation of the pressure – below 0.01MPa.

Lock Up Valve, YT-430 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

• Compact size – NO bracket is required
• Detects small variation of the pressure – below 0.01MPa.

Lock Up Valve, YT-435 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

• Compact size – NO bracket is required
• Detects small variation of the pressure – below 0.01MPa.

YT-520 change the direction of air flow rate from one output port to the another when it senses low air pressure.

• Switches pressure flows when abnormal pressure detected
• Able to look actuator in its position
• Stem can be extended and connected

YT-525 change the direction of air flow rate from one output port to the another when it senses low air pressure.

• Switches pressure flows when abnormal pressure detected
• Able to look actuator in its position
• Stem can be extended and connected

YT-530 change the direction of air flow rate from one output port to the another when it senses low air pressure.

• Switches pressure flows when abnormal pressure detected
• Able to look actuator in its position
• Stem can be extended and connected

YT-535 change the direction of air flow rate from one output port to the another when it senses low air pressure.

• Switches pressure flows when abnormal pressure detected
• Able to look actuator in its position
• Stem can be extended and connected

Explosion proof type 3way solenoid valve, YT-720S series outputs pressure to valves or changes output port direction.

• Explosion proof type (ExdIICT6) solenoid valve.
• Replacement of coil is easy due to AC and DC applied in same enclosure.
• Manual switch enables user to test the operation when the power source is cutoff.
• Connecting wires are easy because connection port can be rotated (265°).
• Valve body is air pressure operating type, so the operation is very smooth with high durability.
• Can be directly attached on actuator, because of NAMUR type design. Coil assembly can be rotated.

Explosion proof type 4way solenoid valve, YT-720D series outputs pressure to valves or changes output port direction.

• Explosion proof type (ExdIICT6) solenoid valve.
• Replacement of coil is easy due to AC and DC applied in same enclosure.
• Manual switch enables user to test the operation when the power source is cutoff.
• Connecting wires are easy because connection port can be rotated (265°).
• Valve body is air pressure operating type, so the operation is very smooth with high durability.
• Can be directly attached on actuator, because of NAMUR type design. Coil assembly can be rotated.

Electronic Position Transmitter SPTM-6V senses mechanical position change of stem being on the valve or similar device : and converses to current signal of DC4~20mA outputs.

• Convenient wiring: 2 wire type
• High accuracy and reliability
• Simple change for RA v.s. DA action setting

Flame type of Electronic Position Transmitter SPTM-6V senses mechanical position change of stem being on the valve or similar device : and converses to current signal of DC4~20mA outputs.

• Convenient wiring: 2 wire type
• High accuracy and reliability
• Simple change for RA v.s. DA action setting

Flame type of Electronic Position Transmitter SPTM-65V senses mechanical position change of stem being on the valve or similar device : and converses to current signal of DC4~20mA outputs.

• Convenient wiring: 2 wire type
• High accuracy and reliability
• Simple change for RA v.s. DA action setting

• Visual position indicator
• Easy adjustment of cam position
• 8 contacts of terminal ports
• Dual conduit entries
• Compatibility with any rotary motion actuator

• Visual position indicator
• Easy adjustment of cam position
• 8 contacts of terminal ports
• Dual conduit entries
• Compatibility with any rotary motion actuator

• Visual position indicator
• Easy adjustment of cam position
• 8 contacts of terminal ports
• Dual conduit entries
• Compatibility with any rotary motion actuator