20092 Cinisello Balsamo
(MI) Italy
27, via F.Ili Gracchi
Website: www.isoil.com
A wide range of products and services across different markets and applications to bring you more “solutions that count”.
ISOCHECK is a device designed to perform tests on ML110 and ML210 converters. The tests are managed by a software interface called ISOCHECK INTERFACE.
The ISOCAL verificator permits insitu verification of ISOMAG. Electromagnetic flowmeter and eliminates the expensive and time-consuming necessity of meter removal and reinstallation. Additionally, ISOCAL provides automated fault-finding capabilities helping to find and prevent possible meter malfunctioning. Unit supplied with ISOCAL INTERFACE software for complete control via PC and USB cable connection.
APL allows the powering of any converter of the Flowiz™ family using a photovoltaic module. The system includes a solar panel that converts sunlight into the electrical energy and an electronic circuit that controls and regulates the energy provided by the module. The energy is stored in a rechargeable battery located inside a metallic box and used by the FlowizTM converter as required. When the solar panel is used, the Flowiz™ converter switches to continue measuring mode and the GPRS is permanently ON.
The plastic CIAO sensor with patented connection system and closing through metallic clamps, is ideal for applications where volumetric counters are normally used, with all the advantages of the electromagnetic flow-meter.
The MS 501 ‘microflux’ sensor is the smallest instrument of the series, with a wide range of process connections for all the applications.
Wide choice of electrodes materials.
The MS 1000 ‘wafer’ sensor is easy to be mounted thanks to the absence of flanges; it can be installed by inserting it between counter flanges of various type (UNI, DIN, ANSI, JIS etc.). It is suited for all the principal applications, for the markets of water and HVAC and in cooling plants.
The MS 600 ‘microflux’ sensor has a wide range of process connections for all the applications.
Wide choice of process connections
Wide choice of electrodes materials.
The MS 2410 ‘sanitary’ sensor is specific for food or pharmaceutical plants. It is resistant to the vacuum (absolute 200 mbar at 100°C), ideal for CIP cycles, 3A and FDA certificates.
The MS 2500 ‘flanged’ sensor, for universal utilization, suited for all the application and flow ranger, is available with the widest diameters range.
IFX-A Ultrasonic Flow meter for applications in clean water and in low conductivity media. Operating principle based on transit time measurement.
IFX-B Ultrasonic Flow meter for applications in clean water and in low conductivity media. Operating principle based on transit time measurement.
IFX-C MID Approved Ultrasonic Flow meter for drinking water application. Operating principle based on transit time measurement.
An ultrasonic flow sensor particularly suitable for the measurement of energy consumption for fluids, also other than water, energy systems in closed-loop or open and for water consumptions.
An energy meter and ultrasonic flow meter which can be used for the measurement of energy consumption for fluids, also other than water in energy systems closed-loop or open, and for consumption water.
An energy meter and ultrasonic flow meter which can be used for the measurement of energy consumption for fluids, also other than water in energy systems closed-loop or open and for consumption of water.
ISOFLUX ™ IFX-F100 Ultrasonic flow meter clamp-on type for fixed installation. Range of sensors for flow measurement in a wide variety of liquids, including and ultra-pure and non-conductive liquids, in pipes from DN10 to DN 3000 and for temperatures up to 200 ° C. Measuring principle based on transit time with dual DSP technology for greater accuracy.
Designed for quick checks of flow conditions in closed pipes in a non-intrusive way, using external probes “clamp-on” suitable for pipes of different materials (steel, iron, plastic and cement). Range of sensors for the flow measurement in a wide variety of liquids, including ultrapure and nonconductive, liquids in pipes from DN10 to DN 3000 and for temperatures up to 200 ° C. Measuring principle based on transit time with dual DSP technology for greater accuracy.
Battery operated Clamp-On Ultrasonic Flow Meter Designed for temporary site installation Easy and fast to install thanks to non-invasive sensors based on transit time ultrasonic principle. Large battery capacity intended for long-term installation hanks to modular battery packs grating up to more than 3 months continue measuring. Robust and sealable IP67 housing granting measurement and instrument safety. One sensors pair able to cover process pipes from DN 50 to DN 3000 Integral logger allowing up to 1.000.000 of measured data storage. Delivered with software for data download and management. 4-20 mA, pulse or relay process outputs available on request Installation of sensors driven by software, for easy identification of the correct positions. Suitable for a variety of applications from water network for leak detection and district metering, to temporary replace in line flow meter, to industrial installation on corrosive or dangerous media.
Resistance thermometer PT500 (PT100 and PT1000 on request). Suitable for use in the calculation of the thermal energy paired calibrated. Sensors according to EN1434 – 2: The PLT are produced with suitable rod to the DN of the line on which to install them. Accuracy conforms to EN 60751 + A2: 2000, and subject to the Directives 2004/22/EC of 31 March 2004: – Annex I / Annex MI-004 for heat meter. The sensors coupled can also be supplied individually. Versions up to 10 meters with cable or head-to-wire longer. Wells with seal/sealing on request.
ML311 is a BTU meter usable for any kind of flow meter with pulse or analog output as: Turbines, Bulk, Woltmann, Impellers, Single or Multi jet, Ultrasonic and, of course, Electromagnetic meters. ML311 is also certified MID004 referring to EN1434 norms following Directives 2014/32/EU, very important for European market. The new BTU meter has got a very accurated calculation either for water or other fluid as Glycole, an automatic switch from hot to cool for cogeneration and trigeneration plants, a large 12 months logger and can get until three pulses signals use to cold and heat home water. ML311 can be connected to any kind of thermistor probe as PT100/500/1000 with 2 or 4 wires. It can also transmit data by different protocols as RS232, RS485, MODbus, BACnet, Mbus.
The DMT (Data Management Terminal) is a data center able to receive up to 120 M-Bus points of measure. The 7” TFT touch screen display ensures easy-to-handle on-site operation without the need of a PC. Because it contains a Web server, the instrument can also be remotely operated via an Intranet/Internet network. It has an internal memory, a CF card slot and an USB port.
Resistance thermometer PT500 (PT100 and PT1000 on request). Suitable for use in the calculation of the thermal energy paired calibrated. Sensors according to EN1434 – 2: The PLT are produced with suitable rod to the DN of the line on which to install them. Accuracy conforms to EN 60751 + A2: 2000, and subject to the Directives 2004/22/EC of 31 March 2004: – Annex I / Annex MI-004 for heat meter. The sensors coupled can also be supplied individually. Versions up to 10 meters with cable or head-to-wire longer. Wells with seal/sealing on request.